OVIVO® Suction Header Clarifier

The Ovivo® suction header clarifier is designed mainly for municipal wastewater treatment applications. It features rapid sludge removal by suction. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier model is well adapted for primary and secondary clarification process. It can be offered as a bridge or column supported clarifier design.
  • Rapid return sludge
  • Suction duct header clarifier
  • High quality effluent
  • Low maintenance
  • Low operator attention
  • No sludge collection plugging problems

The Ovivo® suction duct clarifier is designed for municipal and industrial wastewater treatment applications. It features rapid sludge removal by the action of a suction duct header. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal. It is available in bridge or column supported clarifier designs.

  • Low maintenance
  • Trouble free installation
  • Long lasting design
  • Rapid return sludge
  • High quality effluent
  • High sludge concentration

The Ovivo Type C3D suction duct header clarifier provides a rapid return of the collected sludge for fresh, highly concentrated bio solids and high quality effluent. The suction duct header coupled with the rotating sludge collection manifold will assure the Owner of fresh, concentrated bio solids.

Ovivo circular clarifiers have been used in clarification for over 80 years. They present consistent and reliable results for numerous applications throughout the industry. The Ovivo cast-iron, oil lubricated drives are best choice for long life, low maintenance, and dependable equipment in the harsh atmosphere of wastewater and industrial applications.

Ovivo’s clarifier design provides trouble-free and quick installation. The variety of options available and Ovivo’s clarification experts will help you select the right equipment for your specific application.

 

The suction duct header clarifier mechanism uses the fundamental principal of gravity separation of solids from liquid to produce a clarified overflow water and sludge. The sludge accumulated at the bottom of the clarifier is then removed via a suction duct header.

Mixed liquor enters the clarifier through a center column and is discharged into the energy dissipating inlet (EDI) through influent ports in the center column.

The EDI dissipates the kinetic energy of the influent mixed liquor flow. Evenly spaced tangentially oriented scoops or vanes in the EDI shell create a controlled and quiescent discharge of the mixed liquor into the flocculating feedwell to enhance flow distribution and flocculation. For a high efficiency energy dissipating inlet see Ovivo’s EquaFlo 360™ EDI.

The flocculating feedwell promotes flocculation of the mixed liquor suspended solids. It allows for a gradual redirection of the flow velocity into the clarifier and the sedimentation of the flocs creating a sludge blanket at the bottom of the tank.

Designed for rapid sludge removal, the Ovivo type C3D Clarifier features a suction duct header coupled to a rotating sludge collection manifold. The suction header has a tapered rectangular cross section with orifices spaced along its length. The orifice size and spacing is designed such that sludge withdrawal is proportional to the relative area of the tank served. The header, tilted at 45 degrees is fitted with an extended blade and neoprene squeegee to direct sludge to the header orifice.

The suction header is connected to a sludge collection manifold. The manifold, which is attached to the bottom end of the center cage, is sealed around the center column and to the tank floor. The manifold, suction header and support arms are rotated by the clarifier drive via the cage.  The manifold encompasses the sludge discharge pipe which terminates at the tank floor level.

Ovivo’s cast-iron, oil lubricated drives are equipped with bearings, worms and pinion mounted on a precisely machined surface. In every drive a high quality solid pinion maintains alignment and gives better resistance to bending and deflection under loads. Mating parts are machined to precise tolerances to assure precise fit and alignment. Every drive part is fully restrained (top and bottom) with no overhung loads. Main bearings are fully restrained into base. Worm gear reducer, single solid pinion, single solid worm / worm shaft and main gear all meet the latest AGMA (American Gear Manufacturers’ Association) standards.

Each drive is equipped with an overload control device activated by thrust from the worm shaft. This drive control includes a clear plastic enclosure and a weatherproof enclosure of epoxy coated aluminum construction with electro-mechanical switches.

  • Featured
  • Clarifier sizes: 20’ to +200’ diameter
  • Drive design: cast iron base, time tested strip liner bearing, solid deep gear, oil bath lubrication, up to 35 years of service
  • Drive torque capacity: 9,000 ft-lbs to 1,000,000 ft-lbs AGMA 20 years continuous torque
  • Rotation speed: 8 to 14 fpm, variable speed available
  • Available mechanism fabrication materials: A36 steel, hot dip galvanized steel, 304 & 316 stainless steel
  • Scum skimming design: conventional scum trough, full trough skimmer, rotating pipe skimmer
  • Tank configuration: accommodate existing and new tank, steep to flat tank bottom, shallow or deep side water depth

contact us