Brackett Green® Dual Flow Traveling Band Screens

Brackett Green® Dual Flow Traveling Band Screens are compliant with most of the new Environmental Protection Regulation around the world including the US’s EPA 316(b) with the highest debris-capture ratios in the industry. With over 200 years of industry experience, Ovivo can custom design for your specific application, and optimize your overall treatment solution. Recently re-designed, the traveling band screens can be installed as a single system, or as part of a two or three stage system.
  • No debris carryover
  • No immersed bearings or sprockets
  • EPA 316(b) compliance
  • Flow capacity within the range of 0.5 to 18 m3/sec
  • Effective widths up to 5m

The Brackett Green® dual flow traveling band screens are custom-designed for each application and can incorporate specific features to suit individual operating and site conditions, water levels and design codes. This can include seismic qualification and design for nuclear safety-related cooling water duty. Other options include a fish recovery and return system, which recovers and returns captured fish intact to the water body, as well as adaptations for handling large volumes of jellyfish.

The dual flow traveling band screens design eliminates any risk of carryover in comparison with a through flow design where debris not removed at the deck level goes into the clean water area.

The Brackett Green dual flow traveling band screen materials of construction range from coated carbon steel to 316 or duplex stainless steel and can include provisions for either sacrificial anode or impressed current cathodic protection.

  • Small screen width for effective screening
  • Provides a large screening area in a compact footprint
  • Less downtime and maintenance cost by eliminating the bottom sprocket
  • No civil work required to upgrade from a through flow to a dual flow design

The Brackett Green® Dual Flow Traveling Band Screens Conversion (image above) are designed to replace Straight Through Traveling Band Screen without any civil work to be done at the existing structure.

Brackett Green® Dual Flow Traveling Band Screens

Water passes through the dual flow band screen’s endless band of screening panels. Any debris collected on the mesh panels is raised to deck level and removed by backwashing.

Main chains (supported by two sprockets above the deck) carry the screening band, and an electric motor on a shaft-mounted reduction gear unit provides the drive.

While underwater, the main chains run in guide sections fitted with wearing strips located in a self-supporting fabricated frame.

 

Frame construction:

The main chain guides and head frame assembly (complete with drive gear) are contained in a freestanding, fabricated steel frame that is manufactured in sections and installed directly into the screen chamber. This design reduces civil work and eliminates the need for alignment of chain guides as built-in components.

Additionally, this style of frame construction allows for sections of the screen to be removed for periodic maintenance, eliminating the need to lift the entire screen out of the chamber for each maintenance interval, thereby reducing headroom space requirements and equipment downtime.

Contact Seal:

For sites that require fine mesh or where particular types of debris may bypass the screen, a flexible, neoprene contact seal, which is attached to the main structure and is in contact with the main chain sealing fins is available.

Flow Pattern

Through our experience in designing band screens for water intakes, Ovivo has determined that the dual flow traveling band screen (DF) or out-to-in flow pattern is the most suitable flow pattern for the majority of water intakes. With this pattern, the water exits through the back opening after flowing through the mesh panels to the inside of the screen. Debris cannot be carried over to the clean water area and it produces a converging flow, which is preferable when the pump is close coupled to the traveling band screen.

The following flow patterns are also possible:

    • Central flow: For some applications, a central flow traveling band screen(CF) or in-to-out flow pattern is sometimes preferred. This flow pattern, commonly supplied in a “frameless” design, also prevents debris carryover.
  • Through flow: The through flow traveling band screen pattern has the advantage of a simplified civil structure compared with DF and CF band screens, but does not eliminate debris carryover. Ovivo can design and supply traveling band screens with this flow pattern for existing through flow installations and can offer a through flow to dual flow conversion allowing the benefits of a DF screen to be realized without modification to the existing civil structure.

contact us